As with the cost, it is difficult to estimate the exact time that it will take for a bathroom renovations project since it depends on a variety of factors such as the size and requirements of the renovation. On average though, it takes anywhere between 2 – 4 weeks to complete a bathroom renovation with shorter projects that just need replacement/upgrade of appliances/fittings taking as little as 1 week. Our team here at Bathroom Renovations Sydney is highly efficient and ensures that minimum time is needed for your renovations project.
A DIY bathroom remodel is a big project. If you can only work weekends, your bathroom will be out of commission for two months or more. You’ll need all your expertise as an experienced do-it-yourselfer because you’ll have to tackle electrical, plumbing, tiling, drywalling, taping and even exterior siding. In this DIY shower remodel article, we’ll deal mostly with the nuts and bolts of ripping out existing plumbing and replacing it correctly with new, easily installed PVC piping.
Splurge on the accessories. With so few accessories to consider, you can spend more on those you do need. “Invest in the faucet,” says Carolyn Cheetham, president of Design Works by Cheetham in Alberta, Canada. “It’s an opportunity to bring something fun and sculptural into the space.” Also, consider matching the faucet finish to other accessories in the space, such as the towel ring, mirror frame, and light fixture.
Bathroom Renovations Sydney did a superb job from start to finish when I wanted to get my bathroom redesigned and reconstructed. I opted for their traditional bathroom renovations service and the price they quoted was incredible. Despite initial speculations, the entire remodeling was done perfectly and my bathroom looks absolutely exquisite now! I would definitely recommend their home improvement and designing services.
Electrical rough-in. This is another task that should be left in the hands of pros unless you are one of the very few DIYers who are experts at it. A licensed electrician will run new circuits where required, install lighting and vent fans, and will arrange for the work to be inspected. Later, after the inspection is complete and the walls and ceilings are finished, the electrician will return to hook-up outlets, light fixtures, and fans. Two inspections are required: one at the rough-in phase, another after the final installation. 

This eclectic bath got a one-of-a-kind floor with a pebble-tile "rug" created with mesh-back river rock tile squares. Using just a few pieces of the more expensive pebble tile adds a luxe touch to the bathroom without adding much to the remodeling costs. The pebble tiles are the same color as the border tile, which creates an uninterrupted visual plane along the floor -- and helps the small bath feel larger.
Interior bathroom demolition costs $1,000 to $2,300. Prices can go higher if you’re removing and moving walls to create a different footprint. For the experienced DIYer, this is a good place to save money by doing it yourself or assisting the contractor. However, demo can get expensive quickly if you take out a load bearing wall, cut electrical lines or break a water pipe. Avoid the risk by hiring a pro.
Yes, we have a free quotation service that helps you better understand the cost structure of a renovations project. We believe in being transparent at all levels with our customers, and this is the reason we provide you with a comprehensive quotation with a breakdown of all costs (labor, resources, appliances, equipment, etc.). If you would like to get a customized quotation for your bathroom renovations project, please get in touch with our team and one of our representatives will visit you for understanding your exact requirements.
The “Gorilla Style” Method: Bend a metal coat hanger so that the hanger portion forms a hook. This is a great way to fish out any clumps of slimy hair that might be clogging your shower drain. With an old plastic grocery bag acting as your catch-all for the mess, quickly tie the bag shut when all the gunk is gone to contain the odor. Pour baking soda down the shower drain. Then, add vinegar and immediately plug the shower drain with the rag. Wait 20 minutes for tougher clogs.
If your room is wider than the shower base, fur in the walls as needed to butt against the ends of the shower base (see Photo 14). Our bathroom is 6 ft. wide, so we added a floor-to-ceiling 2×6 wall at the showerhead end and a shorter 2×6 wall at the opposite end. We made that wall only 43 in. above the floor so we could use the top of the wall to hold shampoo and other shower supplies. The shower base usually comes with a special 2-in. drain fitting that you connect to the drain line (Fig. B).

Interior bathroom demolition costs $1,000 to $2,300. Prices can go higher if you’re removing and moving walls to create a different footprint. For the experienced DIYer, this is a good place to save money by doing it yourself or assisting the contractor. However, demo can get expensive quickly if you take out a load bearing wall, cut electrical lines or break a water pipe. Avoid the risk by hiring a pro.
The “Gorilla Style” Method: Bend a metal coat hanger so that the hanger portion forms a hook. This is a great way to fish out any clumps of slimy hair that might be clogging your shower drain. With an old plastic grocery bag acting as your catch-all for the mess, quickly tie the bag shut when all the gunk is gone to contain the odor. Pour baking soda down the shower drain. Then, add vinegar and immediately plug the shower drain with the rag. Wait 20 minutes for tougher clogs.
In an ingenious turn, an inexpensive nightstand was turned into a vanity. It's a sophisticated alternative to a stock vanity and offers the look of a higher-end model. The nightstand drawer is still functional and can be used to store small items. A large above-counter sink minimizes splashing, and the nightstand was treated with a lacquer finish to make it water-resistant.
These are some really great tips for anyone looking into remodeling or rejuvenating their bathroom. I have had the hardest time finding good storage options for my small downstairs bathroom, but that standing shelf unit actually looks really nice, I may have to try to find one like it. Thanks so much for writing, I’ll be referring back to this as I move along with my design.

Tile the walls first, then the floor. When tiling around the window, keep the tile about 1/8 in. away from the glass block. Tile the floor, starting by carefully snapping center lines to lay out border strips and field tile. Work from those lines to get evenly spaced tiles throughout the floor. Grout the walls and floors but caulk the inside corners between floors and walls and where walls meet.

Our service is renowned for providing high-quality bathroom renovations for amazing prices. Even though the cost of individual projects can vary greatly, we can do a complete makeover of your old bathroom for as little as $10,000. If you will need just a re-installation/removal of appliances and fittings then these costs can be even lower. We guarantee you that Bathroom Renovations Sydney will always offer you the most affordable prices for your renovations job!


Master bathroom: This is a full-service bathroom that you use on a daily basis. In homes with two or more full bathrooms, the term "master" usually designates the one used by the home's owner on a daily basis. In homes with only one bathroom, that bathroom serves as the master bath, even if it is quite small. This is typically a fairly important room, one in which owners might spend a fair amount of money on quality, durable, and attractive fixtures and materials. 

The Save My Reno team definitely had a huge task on their hands. This dark and dingy bathroom was in desperate need of a little TLC.

Related: 20 Clever Ways to Save Money in Your Bathroom

Electrical rough-in. This is another task that should be left in the hands of pros unless you are one of the very few DIYers who are experts at it. A licensed electrician will run new circuits where required, install lighting and vent fans, and will arrange for the work to be inspected. Later, after the inspection is complete and the walls and ceilings are finished, the electrician will return to hook-up outlets, light fixtures, and fans. Two inspections are required: one at the rough-in phase, another after the final installation. 

With a DIY mind-set, the owners of this small master bathroom created a personal sanctuary on a budget. This Asian butcher table, found at an antiques shop, was repurposed for the vanity. The table maintains its authenticity with a simple above-counter sink. A new mirror adds a modern touch, while a pebble-tile "rug" on the floor adds texture and a spa-like accent.
In an ingenious turn, an inexpensive nightstand was turned into a vanity. It's a sophisticated alternative to a stock vanity and offers the look of a higher-end model. The nightstand drawer is still functional and can be used to store small items. A large above-counter sink minimizes splashing, and the nightstand was treated with a lacquer finish to make it water-resistant.
Time to jump into your DIY pants. I am going to start off with the easiest and most prevalent DIY project around the house. Believe it or not, new paint can transform your bathroom from 1980s drab to 2010s fab. Whether you go bold with dark blue or casual with stripes, new paint will not only give new life to an outdated bathroom, but make it feel larger as well.

Tile the walls first, then the floor. When tiling around the window, keep the tile about 1/8 in. away from the glass block. Tile the floor, starting by carefully snapping center lines to lay out border strips and field tile. Work from those lines to get evenly spaced tiles throughout the floor. Grout the walls and floors but caulk the inside corners between floors and walls and where walls meet.


Drywall installation. Most remodeling jobs will involve opening up at least some of the walls and ceilings, and after the plumbing and wiring rough-ins have been inspected and passed, a drywall pro or DIYer can then install and finish the drywall. This is somewhat tedious work, but it is well within the skill level of most DIYers. The money-savings here are modest, though, because professional drywall installation is not pricey. 
×