Toenail 2×6 blocks in the center of the shower 36 in. above the floor for the shower valve and 6 ft. 6 in. above the floor for the showerhead. Position the valve block so the plastic mud guard on the mixing valve will be flush with the finished wall surface. Attach the shower supply line and the hot and cold supply lines to the valve. Clamp the valve body and shower supply line to the blocks with copper pipe straps. Run copper water supplies to the new locations for the sink and toilet.
Most people think "small bathroom," and they think cramped shower stalls, dim lighting, and vanities stuffed to the gills. And while a small bathroom may mean making a few sacrifices on space, it can also be welcoming and comfortable. Plus, consider the major pros of a small bathroom. With less square footage to deal with, it's cheaper to renovate, faster to clean, and easier to decorate.
Turn off the main water supply to the house, and in a convenient location, cut the hot and cold water supply pipes for the bathroom. Also cut out and remove all the existing water lines and fittings in the bathroom. Finally, cut out and remove the vent section leading to the sink and the main stack 5 in. below the vent tee. Stuff rags into open drain lines to keep sewer gas out of the house.
Tile and flooring. Ceramic tile can pose one of the more significant costs for a bathroom, both in terms of time and materials costs. Ceramic tile showers and floors are premium materials that many homeowners choose to leave to the pros for installation. Tile work can be difficult to get right for a DIYer, but the cost-saving rewards can substantial, as this is labor-intensive work. Other flooring options are considerably less expensive, as well as friendlier to DIY installation. Tile and flooring is one area where you can save money by doing your research and buying materials online or when product lines are being discontinued. 

By clicking View ProsView Matching Pros, you affirm you have read and agree to the HomeAdvisor Terms, and you agree and authorize HomeAdvisor and its affiliates, and their networks of Service Professionals, to deliver marketing calls or texts using automated technology to the number you provided above regarding your project and other home services offers. Consent is not a condition of purchase.

Although this bath was done on a budget, its small footprint didn't require much flooring material, which provided the homeowners an opportunity to splurge a bit. This woven mosaic tile is a perfect complement to the bathroom's style and will wear well. To stretch your budget, surround decorative tile with more affordable plain tile around the perimeter of the room.
Here at Bathroom Renovations Sydney, we provide you with the complete range of bathroom renovations services for modern bathrooms, luxurious bathrooms, small bathrooms, and traditional bathrooms. Our complete renovations services include, but are not limited to, planning, designing, remodeling, construction, appliances removal/installation, fittings removal/installation, tiling, and paint. You can choose any one of these services, or our entire assortment of services to enjoy peace of mind with your renovation.
Given the complexity of bathrooms—multiple components in a compact space, not to mention all that water—doing the project right is a challenge. (See Remodeling Dos and Don'ts.) On a cost-per-square-foot basis, bathrooms are one of the most expensive spaces to remodel. But that doesn’t mean you have to spend a fortune. That’s where Consumer Reports’ Bathroom Remodeling Guide comes in. Our product testers have spent months rating the latest toilets, sinks, countertops, and other bathroom essentials to separate the winners from the also-rans. We’ve also interviewed designers, contractors, and real estate pros nationwide to find out what to include—and what to skip—on your bathroom-remodel wish list.  
Nail the bottom plate to the floor and the top plate to the ceiling. Then mark the positions of the shower base, toilet and sink. Lay out and toenail the wall studs into position (Fig. B) and the top plate for the low wall. On the opposite end of the shower, frame a matching 35-in. wide wall (see Photo 14) 60-1/4 in. (or the length of your shower base plus 1/4 in.) away from the first wall.
Plumbing rough-in. The plumbing work is one area where DIYers should be cautious, as the results of a bad installation can be catastrophic. Very skilled DIYers can do their own plumbing (and save lots of money), but most DIY remodelers hire pros for the plumbing work. The plumber may make several visits over the course of the remodeling job—one reason why this is one of the more expensive components of the project. Two inspections are required: one at the rough-in phase, another after the final installation. 
You’ll spend $3,000 to $8,000 on the typical remodel. Anywhere from 40 to 65 percent of a bath upgrade cost comes from labor. However, doing any project yourself means no insurance and added fees if something goes wrong. Hire a professional for any work you’re not comfortable doing, such as the plumbing and electrical. Consider the pros and cons of DIY vs professional bathroom remodeling.

Remodeling your bathroom might seem like a complex task, but proper planning can help you get the look and feel you want for your home. Use this guide to learn more about the benefits of remodeling your powder room, guest bathroom or master bathroom space. Typically, bathroom remodels start at $5,000 and can vary based on the size of your room and the products you choose to update.


Time to update your bathroom fixtures, countertops or tile? Installing a toilet doesn’t have to be a chore. Lowe’s bathroom installation services can have you enjoying your upgrades in no time. We’ll match you with qualified independent professionals in toilet installation, shower installation, shower door installation and more. Considering toilet, sink or bathtub repair? If something can’t be fixed, our network of trusted independent professionals can help you replace toilets, swap out shower doors and find solutions for other issues. Contact Lowe’s to get started today.
These are some really great tips for anyone looking into remodeling or rejuvenating their bathroom. I have had the hardest time finding good storage options for my small downstairs bathroom, but that standing shelf unit actually looks really nice, I may have to try to find one like it. Thanks so much for writing, I’ll be referring back to this as I move along with my design.
Guest bathroom: This is a full-service bathroom, with sink, toilet, and shower or shower/tub combination, but one that is used sporadically when guests visit. In empty-nest homes, a kids' full bathroom might be converted to a guest bath. Because guest baths get only occasional use, many people choose to use economy fixtures and materials, which can greatly cut costs. And because this is a secondary bathroom, you can take your time remodeling it, which also saves cost. 
Tile the walls first, then the floor. When tiling around the window, keep the tile about 1/8 in. away from the glass block. Tile the floor, starting by carefully snapping center lines to lay out border strips and field tile. Work from those lines to get evenly spaced tiles throughout the floor. Grout the walls and floors but caulk the inside corners between floors and walls and where walls meet.

We understand how important it is to get your renovations completed on time particularly when the bathroom being constructed or renovated is used regularly. This is the reason we allocate professionals who are reliable and efficient to handle your renovations job for you so that all work from the planning to the finishing is completed within your time constraints.


A DIY bathroom makeover is not complete without new floor tiles. But before you start grinding away with the grouting, use a mason’s chalk line to mark reference lines perpendicular (at a 90-degree angle) to the wall with the longest continuous line. This will allow you to keep your tiles in a straight line, avoiding the dreaded crooked tiling job.
×