With the rough plumbing complete and the toilet chair carrier in position, finish the electrical and add blocks as needed to support the sink (Photo 15), towel bars, grab bars, etc. Then close up the walls. We recommend cement board for durable tile walls and floors, but other tile backers are available at tile shops. Here are key installation tips:
You’ll spend $3,000 to $8,000 on the typical remodel. Anywhere from 40 to 65 percent of a bath upgrade cost comes from labor. However, doing any project yourself means no insurance and added fees if something goes wrong. Hire a professional for any work you’re not comfortable doing, such as the plumbing and electrical. Consider the pros and cons of DIY vs professional bathroom remodeling.
Framing rough-in. This refers to any structural framing work that is required. Low-level remodels may require no rough-in framing at all, while others may involve work like framing in a new shower stall. While some skills are involved, DIYers can usually do this work if they have moderately good carpentry skills. The framing rough-in may require an inspection to make sure the work is done correctly. 
Planning. Both DIY and contractor remodeling jobs depend on good up-front planning in order to control costs and keep things speedy. Some of the key elements include drawing plans (essential if your remodel will involve layout changes to the bathroom), obtaining building permits, signing contracts with any pros you will use and scheduling their time, and sourcing and ordering materials. A general contractor will do most of this work for you (which is why he costs more), but to save money, you can do all the planning work yourself. 
Although this new bathroom is a bit smaller because of additional plumbing walls, it appears larger. Substituting a shower for the bathtub, adding a large mirror, and using a wall-hung sink and toilet all contribute to the spacious feeling. This big-picture stuff is striking, but it’s the step-by-step details that make this small bathroom remodel work. We cover the little kernels of information that will help your project go more smoothly and with fewer headaches.
Industrial bathrooms design are trendy. It usually uses rouge materials, woods, and visible bricks. Some industrial furniture like lamps for lighting also gives a proper look for this design. Just like this mid-sized bathroom, it has a marble tile porcelain floor and gray walls. Therefore, the colors and accessories applied here make the industrial bathrooms design looks obvious.
Yes, a bathroom remodel can greatly boost the value of your home or office. Often, one of the key factors that go into the valuation of a home or office is the number of bathrooms and the current state of the bathroom. By having your bathrooms renovated and remodeled to a modern luxurious bathroom, you can not just increase the value of your home or office but will also show to potential buyers how much care you have taken of the entire place.
Before starting to renovate a bathroom, consider to determine your budget. The cost of remodeling a bathroom depends on the size, started from small to medium or master. Not only the bathroom, but the fixture price also depends on its size. Moreover, the fixture elements that you will probably need while remodeling a bathroom are new shower or bath, countertops, lighting, flooring, and cabinets.
Guest bathroom: This is a full-service bathroom, with sink, toilet, and shower or shower/tub combination, but one that is used sporadically when guests visit. In empty-nest homes, a kids' full bathroom might be converted to a guest bath. Because guest baths get only occasional use, many people choose to use economy fixtures and materials, which can greatly cut costs. And because this is a secondary bathroom, you can take your time remodeling it, which also saves cost. 
The special-order fixtures, fittings, shower pan, tile and glass block panel can take weeks to get in hand, so do the necessary legwork and ordering well in advance. Before gutting the bathroom, check to make sure that there are shutoffs for all the fixtures or a master shutoff for the entire bathroom. If not, buy ball valve shutoffs sized to fit your pipes. Then turn off the main water supply line where it comes into the house from outside, cut the pipes feeding the bathroom and install the new shutoffs right away (see Photo 7).

For your remodeled bathroom to operate well, it’s critical to install vent and drain lines of the proper size and slope. Use a 2-in. line to drain the shower and 1-1/2-in. line to drain the sink. The vents for the sink and shower can be 1-1/2-in. pipes, but a toilet should be vented with at least 2-in. material. Make sure that the drain lines drop 1/4 in. for every foot of travel toward the main stack.


If you dream of a standalone shower and a claw-foot tub, this cozy bathroom from Hometalk is the perfect inspiration for your next renovation. By replacing a standard shower curtain with a glass door panel, the bathroom feels more open. The frosted glass windows allow precious natural light in (a small space's favorite accessory), without sacrificing privacy.

Fixture hookup. The final step is for the plumber and electrician to return to install the various fixtures and make the plumbing and wiring connections. There is an inherent hazard with any plumbing and wiring work, but when pros have run the plumbing and wiring inside the walls, the final hookups are well within the skill range of experienced DIYers. Make sure, though, that the final installation is inspected. 
The cheapest route of all also typically the one that takes the most time: doing all or most of the work yourself. A very (very) skilled DIYer with plenty of time and a group of willing friends and helpers may be able to finish a bathroom remodel nearly as fast as a general contractor, but very few homeowners fall into that category. And there is the issue of quality: good contractors will do the job professionally, while many DIY installations will be recognizable as the work of an amateur. 

If your would-be sanctuary is a major sore spot, you’re not alone. Bathrooms are second only to the kitchen on people’s wish lists of rooms to remodel, especially since the current economy-induced deferred maintenance has pushed so many past their 20-year lifespan. “At that age, bathrooms really start to get tired,” says Art Donnelly, president of Legacy Design Build in Mount Sinai, New York. “Leaky toilets, grimy grout, loose tiles—you name it, it’s probably an issue.”
Here at Bathroom Renovations Sydney, we offer you some of the most economical packages for toilet renovations. The exact cost of installing a shower can depend on whether you will be purchasing the shower through us, or on your own as well as whether the renovation will need any kind of structural/fitting changes to install the shower. To get an exact quote for installing a shower, please reach out to us with your requirements.
You’ll spend $3,000 to $8,000 on the typical remodel. Anywhere from 40 to 65 percent of a bath upgrade cost comes from labor. However, doing any project yourself means no insurance and added fees if something goes wrong. Hire a professional for any work you’re not comfortable doing, such as the plumbing and electrical. Consider the pros and cons of DIY vs professional bathroom remodeling.
×