Tear out the existing piping (Photos 5 and 6). Then frame the 2×6 walls that will contain the new plumbing and the opposite end of the shower base (Photos 8, 9 and 14). It’s easiest to nail the bottom plate to the floor and the top plate to the ceiling, then fill in the studs one at a time by toenailing them in at the top and bottom. Stack the studs directly in front of the old ones wherever possible. Space the studs in the center of the shower about 12 in. apart to leave room for the shower valve and showerhead. The studs behind the toilet should be spaced exactly 19-3/4 in. apart for securing this toilet chair carrier (Photos 8 and 15).
Time to jump into your DIY pants. I am going to start off with the easiest and most prevalent DIY project around the house. Believe it or not, new paint can transform your bathroom from 1980s drab to 2010s fab. Whether you go bold with dark blue or casual with stripes, new paint will not only give new life to an outdated bathroom, but make it feel larger as well.
The key to a weatherproof, attractive glass block window both inside and out is to encase it in a custom-built wooden frame (Fig. A) with inside dimensions that are 1/2 in. taller and wider than the panel itself. That will give you room to adjust and shim the panel exactly and then inject expanding foam between the frame and the panel to lock it into the opening (Photos 3 and 4).
Focus on durability. The surfaces and fixtures will likely get lots of wear and tear, especially if children use the room. Plastic laminate flooring and countertops are durable and inexpensive, plus the kids likely don’t care if they have high-end materials. As for fixtures, you still want high-quality construction, including all-brass parts and a PVD (physical vapor deposition) finish that resists scratches, but go with basic chrome, rather than pricier nickel or bronze. On the walls, choose an interior paint that resists mildew.
Although this bath was done on a budget, its small footprint didn't require much flooring material, which provided the homeowners an opportunity to splurge a bit. This woven mosaic tile is a perfect complement to the bathroom's style and will wear well. To stretch your budget, surround decorative tile with more affordable plain tile around the perimeter of the room.
Toenail 2×6 blocks in the center of the shower 36 in. above the floor for the shower valve and 6 ft. 6 in. above the floor for the showerhead. Position the valve block so the plastic mud guard on the mixing valve will be flush with the finished wall surface. Attach the shower supply line and the hot and cold supply lines to the valve. Clamp the valve body and shower supply line to the blocks with copper pipe straps. Run copper water supplies to the new locations for the sink and toilet.
By clicking View ProsView Matching Pros, you affirm you have read and agree to the HomeAdvisor Terms, and you agree and authorize HomeAdvisor and its affiliates, and their networks of Service Professionals, to deliver marketing calls or texts using automated technology to the number you provided above regarding your project and other home services offers. Consent is not a condition of purchase.
Master bathroom: This is a full-service bathroom that you use on a daily basis. In homes with two or more full bathrooms, the term "master" usually designates the one used by the home's owner on a daily basis. In homes with only one bathroom, that bathroom serves as the master bath, even if it is quite small. This is typically a fairly important room, one in which owners might spend a fair amount of money on quality, durable, and attractive fixtures and materials.
Yes, definitely. We recommend that you purchase appliances/tiles/fittings on your own so that you can choose products that perfectly suit your taste and needs. We will help you get in touch with trusted suppliers and will guide you through the correct size/type of products to buy but the ultimate choice will be yours. On the other hand, if you are looking for someone to take care of all the hassle of picking and choosing the best appliances and tiles, then we can do it all for you, too!
Here at Bathroom Renovations Sydney, we provide you with the complete range of bathroom renovations services for modern bathrooms, luxurious bathrooms, small bathrooms, and traditional bathrooms. Our complete renovations services include, but are not limited to, planning, designing, remodeling, construction, appliances removal/installation, fittings removal/installation, tiling, and paint. You can choose any one of these services, or our entire assortment of services to enjoy peace of mind with your renovation.
Full bathroom: This is any bathroom with a full range of amenities—toilet, vanity, sink, and tub/shower. It is a bathroom that is normally used every day. In homes with two or more full bathrooms, one full bath may be designated as the master bath, with others are dedicated to one or more children. Full bathrooms get lots of use, which has an impact on the fixtures and materials you choose for it.
Yes, all of our bathroom renovations projects are covered under a 7-year guarantee. We work with the best tradesmen and professionals in the industry to ensure that all work is done in compliance with the Australian building codes but at the same time, also provide guarantees for all work that we do. We are here to ensure the maximum satisfaction of our customers.
Mixing modern with antique is the secret to this bathroom's signature look. Both the vanity and sink/faucet combination are simplistic but foster vintage and contemporary aesthetics. This single-lever faucet is easy to use, and the tall spout is the perfect height to deliver water to the vessel sink. A nickel finish on all the fixtures creates a cohesive look in this master bath.
This story shows you how to make your small, cramped bathroom more convenient, elegant and easy to clean. These projects make the typical 6 x 8 ft. bathroom feel larger and more comfortable. We'll walk you through the steps for getting more natural light in your shower, replacing your dingy old bathtub with a spacious shower, and installing a toilet and sink that simplify cleaning. So stop dealing with an outdated bathroom and get to work!
Electrical rough-in. This is another task that should be left in the hands of pros unless you are one of the very few DIYers who are experts at it. A licensed electrician will run new circuits where required, install lighting and vent fans, and will arrange for the work to be inspected. Later, after the inspection is complete and the walls and ceilings are finished, the electrician will return to hook-up outlets, light fixtures, and fans. Two inspections are required: one at the rough-in phase, another after the final installation.
If your room is wider than the shower base, fur in the walls as needed to butt against the ends of the shower base (see Photo 14). Our bathroom is 6 ft. wide, so we added a floor-to-ceiling 2×6 wall at the showerhead end and a shorter 2×6 wall at the opposite end. We made that wall only 43 in. above the floor so we could use the top of the wall to hold shampoo and other shower supplies. The shower base usually comes with a special 2-in. drain fitting that you connect to the drain line (Fig. B).
Powder room: Larger homes often have a powder room, or half-bath, that has little more than a sink, toilet, and a door for privacy. It is a convenience bathroom used by family members and guests when they have no need for the amenities of a full bathroom. The small size and a limited number of fixtures mean that a powder room can be remodeled fairly quickly, but because it is a secondary bathroom, it also means that you can take your time since there is at least one other bathroom that can fill during remodeling.
A DIY bathroom makeover is not complete without new floor tiles. But before you start grinding away with the grouting, use a mason’s chalk line to mark reference lines perpendicular (at a 90-degree angle) to the wall with the longest continuous line. This will allow you to keep your tiles in a straight line, avoiding the dreaded crooked tiling job.