After removing your shower head and handle, cover your shower floor with newspaper. Take your hammer and chisel and start from the bottom corner. Gently place the chisel on the side of tile and use your hammer to push the tile out. Start gently. As you move on, you may have to use some real elbow grease to get these tiles out. Once all tile has been removed, chisel off any remaining mortar as well.

There is no way around it: it costs more to remodel quickly than it does to take your time. This is primarily because a quick remodel really requires a general contractor (GC) to coordinate the project with various subcontractors (plumbers, electricians, tiling contractors), and you are paying for the general contractor's skill and experience. While it is possible for a homeowner to serve as his or her own general contractor—interviewing, hiring, supervising, and paying individual professionals to do their work in order—this is always a slower process than allowing a GC to coordinate his preferred subcontractors. Hiring your own subcontractors, though, can save you quite a bit of money, as you eliminate the time and overhead of the general contractor. 
It's hard to believe this is the same bathroom! Light and airy with a pop of colour thanks to the wall art, this chic soaking tub leaves plenty of room for the standing shower and various knick knacks.

Related: 9 Major Mistakes to Avoid When Renovating Your Bathroom

Tear out the existing piping (Photos 5 and 6). Then frame the 2×6 walls that will contain the new plumbing and the opposite end of the shower base (Photos 8, 9 and 14). It’s easiest to nail the bottom plate to the floor and the top plate to the ceiling, then fill in the studs one at a time by toenailing them in at the top and bottom. Stack the studs directly in front of the old ones wherever possible. Space the studs in the center of the shower about 12 in. apart to leave room for the shower valve and showerhead. The studs behind the toilet should be spaced exactly 19-3/4 in. apart for securing this toilet chair carrier (Photos 8 and 15).
Splurge on the accessories. With so few accessories to consider, you can spend more on those you do need. “Invest in the faucet,” says Carolyn Cheetham, president of Design Works by Cheetham in Alberta, Canada. “It’s an opportunity to bring something fun and sculptural into the space.” Also, consider matching the faucet finish to other accessories in the space, such as the towel ring, mirror frame, and light fixture.
To begin, rip the top and side jambs to the thickness of the wall framing plus the exterior wall sheathing. The cement board will lap over the jambs. The windowsill should also be flush with the interior framing, but hang over the outside sheathing about 1-1/2 in. and have a 5-degree slope toward the outside to help shed water. To keep water from running behind the siding as it drips off the edge, cut a shallow groove (or saw kerf) in the bottom lip (Fig. A). Also, remember to flash behind the trim to keep the window watertight. Trim the window exterior to match the house, using caulk to seal between the trim and siding.
For the most part, that means moving the GFCIs (Ground Fault Circuit Interrupters) and other power outlets so that they line up with your new vanity and cabinets. After all, you don’t want to have to reach down next to the toilet in order to plug in your hair dryer. You should call in an electrician for this step, especially if you have never worked with home wiring before.

Demolition. All remodeling jobs start with tearing out and removing elements that will be replaced. Depending on the level of your remodeling job, this can be a simple matter of removing old fixtures and flooring, or as complicated as removing everything down to the wall studs and floor joists. Either way, this can be hard work but it is not difficult, and most homeowners can do this work themselves to save money. Most demolition can be done in a weekend. You will need to rent a roll-off dumpster or arrange for a disposal company to take away a pile of demolition debris. 
Tile and flooring. Ceramic tile can pose one of the more significant costs for a bathroom, both in terms of time and materials costs. Ceramic tile showers and floors are premium materials that many homeowners choose to leave to the pros for installation. Tile work can be difficult to get right for a DIYer, but the cost-saving rewards can substantial, as this is labor-intensive work. Other flooring options are considerably less expensive, as well as friendlier to DIY installation. Tile and flooring is one area where you can save money by doing your research and buying materials online or when product lines are being discontinued. 
A DIY bathroom makeover is not complete without new floor tiles. But before you start grinding away with the grouting, use a mason’s chalk line to mark reference lines perpendicular (at a 90-degree angle) to the wall with the longest continuous line. This will allow you to keep your tiles in a straight line, avoiding the dreaded crooked tiling job.

Yes, with our affordable bathroom renovation packages, you can significantly reduce your costs by renovating more than one bathroom at a time. We have packages available for two bathroom renovations, three bathroom renovations, and above. If you choose to have two or more renovation projects completed by us, we will offer an exclusive discount that will help you get all bathrooms renovated at an affordable price.

How much should you spend on your master bathroom? A rule of thumb is that the total project—including materials and installation—should cost no more than 5 to 10 percent of your home’s value. The National Kitchen & Bath Association (NKBA) puts the national average at about $16,000. Another guide is Remodeling Magazine's Cost vs. Value report, which compares the average cost of various renovation projects with the value they retain at resale. In 2011-2012, mid-range bathroom remodels cost an average of $16,552 and recouped 62 percent, while upscale bathroom remodels cost an average of $52,249 and recouped 56 percent. Here’s how the NKBA breaks down the budget for a typical bathroom remodel:                               

Here at Bathroom Renovations Sydney, we provide you with the complete range of bathroom renovations services for modern bathrooms, luxurious bathrooms, small bathrooms, and traditional bathrooms. Our complete renovations services include, but are not limited to, planning, designing, remodeling, construction, appliances removal/installation, fittings removal/installation, tiling, and paint. You can choose any one of these services, or our entire assortment of services to enjoy peace of mind with your renovation.


There is nothing better than getting into a hot shower at the end of a long day. My husband and I have been wanting to do some remodeling to our master bathroom and I would love to have any one of these designs. They look so functional for their size and I love the shower doors in some of these designs! These have given me some great ideas, thanks for sharing!
These compact spaces are often tucked into nooks in the home, such as converted pantry closets or the cavity beneath a staircase. They’re all about economy of space, though the best examples also emphasize design. “This is not a high-traffic room, so function is not as important as the wow factor,” says says Elizabeth Goltz, owner of Design by Orion in Kansas City.
Yes, with our affordable bathroom renovation packages, you can significantly reduce your costs by renovating more than one bathroom at a time. We have packages available for two bathroom renovations, three bathroom renovations, and above. If you choose to have two or more renovation projects completed by us, we will offer an exclusive discount that will help you get all bathrooms renovated at an affordable price.
Time to update your bathroom fixtures, countertops or tile? Installing a toilet doesn’t have to be a chore. Lowe’s bathroom installation services can have you enjoying your upgrades in no time. We’ll match you with qualified independent professionals in toilet installation, shower installation, shower door installation and more. Considering toilet, sink or bathtub repair? If something can’t be fixed, our network of trusted independent professionals can help you replace toilets, swap out shower doors and find solutions for other issues. Contact Lowe’s to get started today.
How much should you spend on your master bathroom? A rule of thumb is that the total project—including materials and installation—should cost no more than 5 to 10 percent of your home’s value. The National Kitchen & Bath Association (NKBA) puts the national average at about $16,000. Another guide is Remodeling Magazine's Cost vs. Value report, which compares the average cost of various renovation projects with the value they retain at resale. In 2011-2012, mid-range bathroom remodels cost an average of $16,552 and recouped 62 percent, while upscale bathroom remodels cost an average of $52,249 and recouped 56 percent. Here’s how the NKBA breaks down the budget for a typical bathroom remodel:                               
After removing your shower head and handle, cover your shower floor with newspaper. Take your hammer and chisel and start from the bottom corner. Gently place the chisel on the side of tile and use your hammer to push the tile out. Start gently. As you move on, you may have to use some real elbow grease to get these tiles out. Once all tile has been removed, chisel off any remaining mortar as well.
These are some really great tips for anyone looking into remodeling or rejuvenating their bathroom. I have had the hardest time finding good storage options for my small downstairs bathroom, but that standing shelf unit actually looks really nice, I may have to try to find one like it. Thanks so much for writing, I’ll be referring back to this as I move along with my design.
The choice of whether to do the work yourself or to hire pros (a general contractor or managing your own subcontractors) will, of course, depend on your assessment of your own skills, but also on your budget and your time schedule. If you have limited DIY skills and the small bathroom is the only bathroom you have, then getting the remodel done quickly and correctly is worth the extra cost of hiring pros—even if it means taking out a loan to do it. 
Disconnect the trap from the tub, remove any clips, fasteners or screws that hold the tub to the wall, and demolish the old cast iron tub with a sledgehammer. Remove the sink and toilet. Turn off the electricity at the main panel and remove light fixtures. Cap the wires with wire connectors. Then rip out the wall finishes and surfaces clean down to the studs and pull out any insulation. If your ceiling is in good shape, use a utility knife to cut the drywall along the edges so the wall materials will separate cleanly from the ceiling.
The Home Depot is a great place to buy your bathroom essentials and remodeling materials. We also provide top-rated design and installation services for homeowners across America. Besides undergoing full background checks, our hand-selected remodeling experts are local, licensed and insured. The Home Depot also offers a great selection of flexible finance options.
×