A DIY bathroom makeover is not complete without new floor tiles. But before you start grinding away with the grouting, use a mason’s chalk line to mark reference lines perpendicular (at a 90-degree angle) to the wall with the longest continuous line. This will allow you to keep your tiles in a straight line, avoiding the dreaded crooked tiling job.
For the most part, that means moving the GFCIs (Ground Fault Circuit Interrupters) and other power outlets so that they line up with your new vanity and cabinets. After all, you don’t want to have to reach down next to the toilet in order to plug in your hair dryer. You should call in an electrician for this step, especially if you have never worked with home wiring before.

Fixture hookup. The final step is for the plumber and electrician to return to install the various fixtures and make the plumbing and wiring connections. There is an inherent hazard with any plumbing and wiring work, but when pros have run the plumbing and wiring inside the walls, the final hookups are well within the skill range of experienced DIYers. Make sure, though, that the final installation is inspected. 
Planning. Both DIY and contractor remodeling jobs depend on good up-front planning in order to control costs and keep things speedy. Some of the key elements include drawing plans (essential if your remodel will involve layout changes to the bathroom), obtaining building permits, signing contracts with any pros you will use and scheduling their time, and sourcing and ordering materials. A general contractor will do most of this work for you (which is why he costs more), but to save money, you can do all the planning work yourself. 
Industrial bathrooms design are trendy. It usually uses rouge materials, woods, and visible bricks. Some industrial furniture like lamps for lighting also gives a proper look for this design. Just like this mid-sized bathroom, it has a marble tile porcelain floor and gray walls. Therefore, the colors and accessories applied here make the industrial bathrooms design looks obvious.
The average bathroom remodel costs $10,436 Most homeowners spend between $5,968 and $14,905. You can spend as little as $3,500 to $7,000 updating the essentials in a small or medium-sized bathroom. On a large or master bath, you could spend $25,000 or more. Labor averages 50 percent of the total project price at about $65 per hour. Expect pricing to vary regionally up to 20 percent due mainly to labor. Material prices stay roughly the same across the country.
Follow Fig. B, for the new drain/vent plan. The new shower drain is vented separately into the main stack (Photos 10, 12 and 13). Most bathrooms have the main stack positioned directly behind the toilet. The wall-mounted toilet shown here cannot be positioned directly behind the stack because there’s not room for the necessary elbows. If your stack is more than 12 in. to the side of the existing toilet, you can keep the same location for the wall-hung toilet. But if it’s directly behind it, you’ll need to swap the sink and toilet locations like we did.

Adding wainscoting to your bathroom creates a more classic look and lends a bit of visual interest. For a more design-forward approach, invest in a graphic wallpaper, such as this tropical one seen on Design Sponge. By keeping the wainscoting white and neutral, the bold print adds a pop of personality without overwhelming the small space. The white pedestal sink not only uses less floor space than a large vanity but also blends in with the paneling to create an optical illusion of more space.
Most people think "small bathroom," and they think cramped shower stalls, dim lighting, and vanities stuffed to the gills. And while a small bathroom may mean making a few sacrifices on space, it can also be welcoming and comfortable. Plus, consider the major pros of a small bathroom. With less square footage to deal with, it's cheaper to renovate, faster to clean, and easier to decorate.
With the rough plumbing complete and the toilet chair carrier in position, finish the electrical and add blocks as needed to support the sink (Photo 15), towel bars, grab bars, etc. Then close up the walls. We recommend cement board for durable tile walls and floors, but other tile backers are available at tile shops. Here are key installation tips:
If you are looking to get your bathroom constructed or old bathroom renovated anytime soon then Bathroom Renovations Sydney is the perfect service for you. We take care of your bathroom renovations jobs exactly according to your requirements so that you can enjoy a stress-free and comfortable renovations experience without having to worry about the nitty-gritty details.
How much should you spend on your master bathroom? A rule of thumb is that the total project—including materials and installation—should cost no more than 5 to 10 percent of your home’s value. The National Kitchen & Bath Association (NKBA) puts the national average at about $16,000. Another guide is Remodeling Magazine's Cost vs. Value report, which compares the average cost of various renovation projects with the value they retain at resale. In 2011-2012, mid-range bathroom remodels cost an average of $16,552 and recouped 62 percent, while upscale bathroom remodels cost an average of $52,249 and recouped 56 percent. Here’s how the NKBA breaks down the budget for a typical bathroom remodel:                               
These compact spaces are often tucked into nooks in the home, such as converted pantry closets or the cavity beneath a staircase. They’re all about economy of space, though the best examples also emphasize design. “This is not a high-traffic room, so function is not as important as the wow factor,” says says Elizabeth Goltz, owner of Design by Orion in Kansas City.
Yes, definitely. We recommend that you purchase appliances/tiles/fittings on your own so that you can choose products that perfectly suit your taste and needs. We will help you get in touch with trusted suppliers and will guide you through the correct size/type of products to buy but the ultimate choice will be yours. On the other hand, if you are looking for someone to take care of all the hassle of picking and choosing the best appliances and tiles, then we can do it all for you, too!
Disconnect the trap from the tub, remove any clips, fasteners or screws that hold the tub to the wall, and demolish the old cast iron tub with a sledgehammer. Remove the sink and toilet. Turn off the electricity at the main panel and remove light fixtures. Cap the wires with wire connectors. Then rip out the wall finishes and surfaces clean down to the studs and pull out any insulation. If your ceiling is in good shape, use a utility knife to cut the drywall along the edges so the wall materials will separate cleanly from the ceiling.

Most people think "small bathroom," and they think cramped shower stalls, dim lighting, and vanities stuffed to the gills. And while a small bathroom may mean making a few sacrifices on space, it can also be welcoming and comfortable. Plus, consider the major pros of a small bathroom. With less square footage to deal with, it's cheaper to renovate, faster to clean, and easier to decorate.
Tile the walls first, then the floor. When tiling around the window, keep the tile about 1/8 in. away from the glass block. Tile the floor, starting by carefully snapping center lines to lay out border strips and field tile. Work from those lines to get evenly spaced tiles throughout the floor. Grout the walls and floors but caulk the inside corners between floors and walls and where walls meet.
With the rough plumbing complete and the toilet chair carrier in position, finish the electrical and add blocks as needed to support the sink (Photo 15), towel bars, grab bars, etc. Then close up the walls. We recommend cement board for durable tile walls and floors, but other tile backers are available at tile shops. Here are key installation tips:

Yes, all of our bathroom renovations projects are covered under a 7-year guarantee. We work with the best tradesmen and professionals in the industry to ensure that all work is done in compliance with the Australian building codes but at the same time, also provide guarantees for all work that we do. We are here to ensure the maximum satisfaction of our customers.


Homeowners often imagine that remodeling a small bathroom—one that is about 50 square feet or less—will be much quicker, much easier, and much less expensive than remodeling a large bathroom. And they are often surprised to find that it's only a little bit quicker, a little bit easier, and a little bit less expensive. The reason? A small bathroom has most of the same elements as a large bathroom and remodeling requires assistance from the same in-demand professionals as does a large bathroom. The reality is that a 50 square foot bathroom may be one-third the size of a large 150-square-foot bath, but it typically costs about 75 percent of a large bath in terms of time, money, and effort.
My experience with Bathroom Renovations Sydney was quite pleasant. The team of workers they sent over were very knowledgeable and professional and had everything planned out from the demolition to the finishing. Each subcontractor in their team was capable, courteous, and cooperative. The consistency in their work through the renovation and the quality of work that they delivered was simply exceptional. I am very delighted with the results and my bathroom looks as great as well. Thank you so much for all the hard work!
The key to a weatherproof, attractive glass block window both inside and out is to encase it in a custom-built wooden frame (Fig. A) with inside dimensions that are 1/2 in. taller and wider than the panel itself. That will give you room to adjust and shim the panel exactly and then inject expanding foam between the frame and the panel to lock it into the opening (Photos 3 and 4).
Electrical rough-in. This is another task that should be left in the hands of pros unless you are one of the very few DIYers who are experts at it. A licensed electrician will run new circuits where required, install lighting and vent fans, and will arrange for the work to be inspected. Later, after the inspection is complete and the walls and ceilings are finished, the electrician will return to hook-up outlets, light fixtures, and fans. Two inspections are required: one at the rough-in phase, another after the final installation. 
Renovating the laundry room from time to time can be a refreshing experience and if you are looking to get your laundry renovated then this service is just for you. With our laundry renovations services, we help your laundry blend in perfectly with your home and design it so that you can wash, fold, iron, hang, or store laundry comfortable and with a peace of mind.
If your would-be sanctuary is a major sore spot, you’re not alone. Bathrooms are second only to the kitchen on people’s wish lists of rooms to remodel, especially since the current economy-induced deferred maintenance has pushed so many past their 20-year lifespan. “At that age, bathrooms really start to get tired,” says Art Donnelly, president of Legacy Design Build in Mount Sinai, New York. “Leaky toilets, grimy grout, loose tiles—you name it, it’s probably an issue.”
×