BH&G is part of the Meredith Home Group. © Copyright 2019 Meredith Corporation. All Rights Reserved. Privacy Policythis link opens in a new tab Data Policythis link opens in a new tab Terms of Servicethis link opens in a new tab Ad Choicesthis link opens in a new tab EU Data Subject Requeststhis link opens in a new tab Cookie Preferencesthis link opens a modal window Web Accessibilitythis link opens in a new tab
Powder room: Larger homes often have a powder room, or half-bath, that has little more than a sink, toilet, and a door for privacy. It is a convenience bathroom used by family members and guests when they have no need for the amenities of a full bathroom. The small size and a limited number of fixtures mean that a powder room can be remodeled fairly quickly, but because it is a secondary bathroom, it also means that you can take your time since there is at least one other bathroom that can fill during remodeling.
Yes, a bathroom remodel can greatly boost the value of your home or office. Often, one of the key factors that go into the valuation of a home or office is the number of bathrooms and the current state of the bathroom. By having your bathrooms renovated and remodeled to a modern luxurious bathroom, you can not just increase the value of your home or office but will also show to potential buyers how much care you have taken of the entire place.
The key to a weatherproof, attractive glass block window both inside and out is to encase it in a custom-built wooden frame (Fig. A) with inside dimensions that are 1/2 in. taller and wider than the panel itself. That will give you room to adjust and shim the panel exactly and then inject expanding foam between the frame and the panel to lock it into the opening (Photos 3 and 4).
The tank is concealed within a 2×6 wall that’s built in front of the existing plumbing wall. It does require some plumbing rerouting because the waste line runs through the wall instead of the basic floor-mounted toilet flange (see Photos 8 – 12). The toilet can be ordered with a wall-mounted access panel/flush button like ours or with the panel mounted on top of a half wall. A ‘chair carrier’ (Photo 11) comes with the toilet. This steel framework contains the toilet and operating mechanisms and is designed to support the weight of the toilet.
A DIY bathroom makeover is not complete without new floor tiles. But before you start grinding away with the grouting, use a mason’s chalk line to mark reference lines perpendicular (at a 90-degree angle) to the wall with the longest continuous line. This will allow you to keep your tiles in a straight line, avoiding the dreaded crooked tiling job.
Toenail 2×6 blocks in the center of the shower 36 in. above the floor for the shower valve and 6 ft. 6 in. above the floor for the showerhead. Position the valve block so the plastic mud guard on the mixing valve will be flush with the finished wall surface. Attach the shower supply line and the hot and cold supply lines to the valve. Clamp the valve body and shower supply line to the blocks with copper pipe straps. Run copper water supplies to the new locations for the sink and toilet.
The average bathroom remodel costs $10,436 Most homeowners spend between $5,968 and $14,905. You can spend as little as $3,500 to $7,000 updating the essentials in a small or medium-sized bathroom. On a large or master bath, you could spend $25,000 or more. Labor averages 50 percent of the total project price at about $65 per hour. Expect pricing to vary regionally up to 20 percent due mainly to labor. Material prices stay roughly the same across the country.

The key to a weatherproof, attractive glass block window both inside and out is to encase it in a custom-built wooden frame (Fig. A) with inside dimensions that are 1/2 in. taller and wider than the panel itself. That will give you room to adjust and shim the panel exactly and then inject expanding foam between the frame and the panel to lock it into the opening (Photos 3 and 4).

A DIY bathroom makeover is not complete without new floor tiles. But before you start grinding away with the grouting, use a mason’s chalk line to mark reference lines perpendicular (at a 90-degree angle) to the wall with the longest continuous line. This will allow you to keep your tiles in a straight line, avoiding the dreaded crooked tiling job.

Guest bathroom: This is a full-service bathroom, with sink, toilet, and shower or shower/tub combination, but one that is used sporadically when guests visit. In empty-nest homes, a kids' full bathroom might be converted to a guest bath. Because guest baths get only occasional use, many people choose to use economy fixtures and materials, which can greatly cut costs. And because this is a secondary bathroom, you can take your time remodeling it, which also saves cost. 
You’ll spend $3,000 to $8,000 on the typical remodel. Anywhere from 40 to 65 percent of a bath upgrade cost comes from labor. However, doing any project yourself means no insurance and added fees if something goes wrong. Hire a professional for any work you’re not comfortable doing, such as the plumbing and electrical. Consider the pros and cons of DIY vs professional bathroom remodeling.
×