The cost of a bathroom renovation in Sydney can greatly change depending on your exact requirements e.g. Do you need structural changes? Do you need new accessories? However, an average bathroom renovations project that involves a complete makeover for your bathroom can vary between $15,000 to $25,000. We would still recommend that you get in touch with our representatives who can better understand your specific requirements and provide you with an accurate cost breakdown.
My experience with Bathroom Renovations Sydney was quite pleasant. The team of workers they sent over were very knowledgeable and professional and had everything planned out from the demolition to the finishing. Each subcontractor in their team was capable, courteous, and cooperative. The consistency in their work through the renovation and the quality of work that they delivered was simply exceptional. I am very delighted with the results and my bathroom looks as great as well. Thank you so much for all the hard work!
A pedestal sink fits the home’s style but lacks storage, but a glass shelf and a new medicine cabinet stand in as handy storage. The homeowner suggests making sure the new cabinet will fit the existing hole before applying wallpaper in case the opening needs to be modified. Replacing the 1990s oak medicine cabinet with a white-framed version furthers the bathrooms lighter, bright aesthetic.
The special-order fixtures, fittings, shower pan, tile and glass block panel can take weeks to get in hand, so do the necessary legwork and ordering well in advance. Before gutting the bathroom, check to make sure that there are shutoffs for all the fixtures or a master shutoff for the entire bathroom. If not, buy ball valve shutoffs sized to fit your pipes. Then turn off the main water supply line where it comes into the house from outside, cut the pipes feeding the bathroom and install the new shutoffs right away (see Photo 7).
How much should you spend on your master bathroom? A rule of thumb is that the total project—including materials and installation—should cost no more than 5 to 10 percent of your home’s value. The National Kitchen & Bath Association (NKBA) puts the national average at about $16,000. Another guide is Remodeling Magazine's Cost vs. Value report, which compares the average cost of various renovation projects with the value they retain at resale. In 2011-2012, mid-range bathroom remodels cost an average of $16,552 and recouped 62 percent, while upscale bathroom remodels cost an average of $52,249 and recouped 56 percent. Here’s how the NKBA breaks down the budget for a typical bathroom remodel:
Demolition. All remodeling jobs start with tearing out and removing elements that will be replaced. Depending on the level of your remodeling job, this can be a simple matter of removing old fixtures and flooring, or as complicated as removing everything down to the wall studs and floor joists. Either way, this can be hard work but it is not difficult, and most homeowners can do this work themselves to save money. Most demolition can be done in a weekend. You will need to rent a roll-off dumpster or arrange for a disposal company to take away a pile of demolition debris.
Renovating the laundry room from time to time can be a refreshing experience and if you are looking to get your laundry renovated then this service is just for you. With our laundry renovations services, we help your laundry blend in perfectly with your home and design it so that you can wash, fold, iron, hang, or store laundry comfortable and with a peace of mind.
Bathroom Renovations Sydney did a superb job from start to finish when I wanted to get my bathroom redesigned and reconstructed. I opted for their traditional bathroom renovations service and the price they quoted was incredible. Despite initial speculations, the entire remodeling was done perfectly and my bathroom looks absolutely exquisite now! I would definitely recommend their home improvement and designing services.
Electrical rough-in. This is another task that should be left in the hands of pros unless you are one of the very few DIYers who are experts at it. A licensed electrician will run new circuits where required, install lighting and vent fans, and will arrange for the work to be inspected. Later, after the inspection is complete and the walls and ceilings are finished, the electrician will return to hook-up outlets, light fixtures, and fans. Two inspections are required: one at the rough-in phase, another after the final installation.
With the rough plumbing complete and the toilet chair carrier in position, finish the electrical and add blocks as needed to support the sink (Photo 15), towel bars, grab bars, etc. Then close up the walls. We recommend cement board for durable tile walls and floors, but other tile backers are available at tile shops. Here are key installation tips:
The key to a weatherproof, attractive glass block window both inside and out is to encase it in a custom-built wooden frame (Fig. A) with inside dimensions that are 1/2 in. taller and wider than the panel itself. That will give you room to adjust and shim the panel exactly and then inject expanding foam between the frame and the panel to lock it into the opening (Photos 3 and 4).
No, this is not a requirement. Most people opt to stay out of the home (or leave for holidays) during the renovation job. Our team of professionals take the utmost care of your home while you are away and take strict security measures to ensure the maximum safety of your entire home during the renovation. If you choose to stay at your home, our team will respect your home and the privacy of all its members.