A one-piece shower pan is the key to a leakproof shower. We opted for an easily installed fiberglass shower pan. Forty-eight inch wide pans are common and will work well; 60-in. units like we used must be special-ordered. The shower pan has to fit into the space left by the removed bathtub. Most bathtubs are 60 in. long, perfect for a 60-in. shower base.
For the most part, that means moving the GFCIs (Ground Fault Circuit Interrupters) and other power outlets so that they line up with your new vanity and cabinets. After all, you don’t want to have to reach down next to the toilet in order to plug in your hair dryer. You should call in an electrician for this step, especially if you have never worked with home wiring before.
Nail the bottom plate to the floor and the top plate to the ceiling. Then mark the positions of the shower base, toilet and sink. Lay out and toenail the wall studs into position (Fig. B) and the top plate for the low wall. On the opposite end of the shower, frame a matching 35-in. wide wall (see Photo 14) 60-1/4 in. (or the length of your shower base plus 1/4 in.) away from the first wall.
Our service is renowned for providing high-quality bathroom renovations for amazing prices. Even though the cost of individual projects can vary greatly, we can do a complete makeover of your old bathroom for as little as $10,000. If you will need just a re-installation/removal of appliances and fittings then these costs can be even lower. We guarantee you that Bathroom Renovations Sydney will always offer you the most affordable prices for your renovations job!
The key to a weatherproof, attractive glass block window both inside and out is to encase it in a custom-built wooden frame (Fig. A) with inside dimensions that are 1/2 in. taller and wider than the panel itself. That will give you room to adjust and shim the panel exactly and then inject expanding foam between the frame and the panel to lock it into the opening (Photos 3 and 4).

A pedestal sink fits the home’s style but lacks storage, but a glass shelf and a new medicine cabinet stand in as handy storage. The homeowner suggests making sure the new cabinet will fit the existing hole before applying wallpaper in case the opening needs to be modified. Replacing the 1990s oak medicine cabinet with a white-framed version furthers the bathrooms lighter, bright aesthetic.


Toenail 2×6 blocks in the center of the shower 36 in. above the floor for the shower valve and 6 ft. 6 in. above the floor for the showerhead. Position the valve block so the plastic mud guard on the mixing valve will be flush with the finished wall surface. Attach the shower supply line and the hot and cold supply lines to the valve. Clamp the valve body and shower supply line to the blocks with copper pipe straps. Run copper water supplies to the new locations for the sink and toilet.

Even the slightest of errors in bathroom renovations can be the cause of much misery and disappointment in the future. We understand this and therefore, allocate an expert team of renovators who are highly skilled at executing renovation jobs with utmost precision. We conduct a thorough planning and design phase before starting the renovation process so that everything is on point and perfect according to your specific requirements.


Yes, all of our bathroom renovations projects are covered under a 7-year guarantee. We work with the best tradesmen and professionals in the industry to ensure that all work is done in compliance with the Australian building codes but at the same time, also provide guarantees for all work that we do. We are here to ensure the maximum satisfaction of our customers.
The average bathroom remodel costs $10,436 Most homeowners spend between $5,968 and $14,905. You can spend as little as $3,500 to $7,000 updating the essentials in a small or medium-sized bathroom. On a large or master bath, you could spend $25,000 or more. Labor averages 50 percent of the total project price at about $65 per hour. Expect pricing to vary regionally up to 20 percent due mainly to labor. Material prices stay roughly the same across the country.

Many factors that can influence the cost of a bathroom renovation project. This is the reason it is difficult to provide an estimate of the cost. For instance, if you only need a re-installation of tiles/bathroom accessories then the costs will be much lower to a complete bathroom renovation project that involves structural changes. If you would like to learn how much your bathroom renovations will cost, reach out to our team with your requirements and we will get back to you with a free quotation.

Full bathroom: This is any bathroom with a full range of amenities—toilet, vanity, sink, and tub/shower. It is a bathroom that is normally used every day. In homes with two or more full bathrooms, one full bath may be designated as the master bath, with others are dedicated to one or more children. Full bathrooms get lots of use, which has an impact on the fixtures and materials you choose for it. 


With it's black and white tiles and lavender walls, it looks like two bathrooms were squeezed into one. There was definitely a whole lot of clashing visions going on here.

Related: How to Refresh Your Bathroom for Less Than $100

One of the best aspects of modern, contemporary design is the seamless, clean lines that create an open and airy feel. This updated bathroom from OneKindesign feels much bigger than it actually is, in part because the eye is drawn to the crisp, straight lines of the vanity, which elongates the room and almost seem to push the walls out. Neutral colors such as white and unpainted wood are also great choices for small bathrooms.
The wall behind the toilet can be almost any height. For a standard toilet height of 15 in., make the wall a minimum height of 43 in. If you’d like a higher toilet, make the wall that much higher. Or, make the wall go all the way to the ceiling. We built a short wall to conserve space and to create a shelf and a mirror alcove. The wall at the opposite end of the shower can be any height as well. We made it the same height as the toilet/sink wall so we could line up the accent tile and make a convenient shower shelf.
This elegant bathroom from Sugar & Cloth features Midas-approved gold fixtures throughout the design. Not only does the gold give the bathroom a classic look, but by keeping the accessories uniform throughout the space, the room feels cohesive and meaningfully decorated. One of the best ways to make a small bathroom feel inviting is to smartly decorate every nook and cranny.
A DIY bathroom makeover is not complete without new floor tiles. But before you start grinding away with the grouting, use a mason’s chalk line to mark reference lines perpendicular (at a 90-degree angle) to the wall with the longest continuous line. This will allow you to keep your tiles in a straight line, avoiding the dreaded crooked tiling job.
×